『Rongguang air flow meter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. What are the reasons for the sluggish acceleration of Wuling Rongguang?
[Pacific Automotive Network] The main reasons are incorrect ignition advance angle, low fuel pressure, air leakage in the intake system, malfunction of throttle position sensor or air flow meter, poor operation of fuel injectors, and poor operation of EGR system. The length of Wuling Rongguang has reached 4 meters, the width has reached 1620mm, and the height has reached 1915mm. Compared with the conventional micro passenger (within 3.8 meters), the length, width, and height have all been increased comprehensively. The large size brings a large space. Wuling Rongguang has a larger passenger and cargo space than the ordinary extended micro passenger of Suiwu. In 2012, Wuling Rongguang underwent a comprehensive upgrade, with the extended product extending the overall length of the vehicle to 4490mm, the width and height to 1615mm and 1900mm respectively, upgrading from the original 7-seater to 9-seater, providing even more space. On May 9, 2020, Wuling Rongguang electric vehicle was officially launched, with two range versions of 252km/300km available, priced at 83800 to 89800 yuan. The Wuling Rongguang electric vehicle adopts the design style of the current Wuling Rongguang gasoline version as a whole. On the front face, the Wuling Rongguang electric vehicle adopts a narrow strip style grille, with honeycomb elements embellished inside, matched with large-sized light groups on both sides. In terms of the rear, the Wuling Rongguang electric vehicle adopts a vertical taillight assembly. Meanwhile, the Wuling Rongguang EV in the lower left corner highlights the vehicles new energy identity. The overall color scheme adopts black as the main
2. How to clean the Wuling Rongguang 1.2 air flow sensor
The cleaning of the Wuling Rongguang 1.2 air flow sensor should be carried out in three steps: positioning disassembly, precise cleaning, drying and reassembly. When operating, be careful not to damage the thermal sensor. The specific steps are to use the bright surface of the car.
.1. Preliminary preparation and positioning disassembly: 1) Prepare a Phillips screwdriver, pipe clamp, cotton swab, 95% medical alcohol or specialized sensor cleaner, cold air blower, and clean and tidy cloth.
. 2) The air flow meter of the Wuling Rongguang 1.2 model is generally installed on the intake pipe that is widened between the air filter housing and the throttle valve. Some models are directly integrated into the middle section of the intake pipe, and the appearance is mostly a black plastic shell with a wire harness plug. 3) Before disassembly, turn off the engine and disconnect the negative terminal of the vehicle battery. Loosen the clamps on both ends of the intake pipe or unscrew the fixing screws. Carefully unplug the sensor harness plug and take out the flow meter.2. Precise Cleaning 1) If there is a dust filter at the front end of the flowmeter, use a soft bristled toothbrush dipped in a small amount of alcohol to gently brush the surface dust, without squeezing the filter with force.
. 2) It is stri
Hot Product
Related AD
