『Compensation type vortex flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. Open channel box flowmeter
2. What are the functions of vortex flowmeter?
Function
1. The body also integrates temperature and pressure compensation function, which can measure the standard volume flow rate or standard mass flow rate of the fluid..
2、 Fully intelligent and digital circuit design, capable of automatically compensating for measured fluid density or standard condition volume calculation.
3、 The new digital filtering and correction functions make flow measurement more accurate and reliable.
4、 The battery powered type can work continuously for more than two years without the need for an external power source.
5、 The brand new dot matrix Chinese character LCD display is more convenient to use and operate. Additional information: The flow range indicated in the instruction manual for common faults of vortex flow juice refers to the flow range used for specific reference media in the side nucleus, such as liquid, which generally refers to ambient water. When used for other media, the available flow range will vary depending on the viscosity, durability, and density of the media. Due to the use of diesel with a viscosity higher than water and a density lower than water as the calibration medium in the oil flow standard device, the lower limit flow rate of the flowmeter is generally increased accordingly, narrowing the available flow range. Therefore, it is normal for the performance of vortex flowmeters to deteriorate at low flow rates when calibrated on oil flow calibration devices. It is not difficult to infer from this that if liquefied petroleum gas (a low viscosity medium) is used to calibrate the vortex flow juice, the opposite result will be be
3. Little knowledge you dont know about steam flow meters with supervision and inspection certificates
Steam flow meters with supervision and inspection certificates generally refer to vortex street flow meters with TS certificates. The following are some small knowledge about it: Special Equipment Manufacturing License (TS Certification) Definition: The State Administration for Market Regulation supervises and inspects the production (including design, manufacturing, installation, renovation, maintenance, etc.), use, inspection and testing of special equipment by relevant units, grants employment permits to qualified units, and grants management behaviors of using TS certification marks.
. Qingdao Hesheng Measurement and Control, a manufacturer that has obtained the Special Equipment Manufacturing License (TS certification), obtained the license in October 2020. With over ten years of R&D and production experience, we are one of the few flowmeter manufacturers in Shandong Province to obtain this certification. Production System: We have an independent instrument production base, a complete production system, a professional R&D and production team, a comprehensive after-sales service system, and abundant products. Product types: There are already intelligent heat network management systems, vortex flow meters, electromagnetic flow meters, ultrasonic flow meters, balance flow meters, intelligent flow integrators, prepaid metering monitoring terminals and other products. The types of steam flow meters (vortex flow meters) with Yingshang supervision and inspection certificates are classified according to the installation method. Flange card type: installation is relatively simple, suitable
Hot Blog
Related AD
