Current position > News detail
『Steam mass flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
How to calculate steam flow rate? The calculation of steam flow usually uses flow meters, including differential pressure flow meters, vortex flow meters, or mass flow meters. Using differential pressure flowmeter: Principle: Calculate the flow rate by measuring the pressure difference generated when the fluid passes through the throttling device. Required parameters: fluid density, geometric dimensions of throttling and bench rock excavation, and pressure difference. Calculation formula: The flow rate is proportional to the square root of the pressure difference, based on the Bernoulli equation and the fluid continuity equation. Using a vortex flowmeter: Principle: Calculate flow rate by measuring the frequency of vortex shedding in the fluid. Required parameters: the coefficient of the flowmeter and the physical properties of the fluid. Output signal: usually a frequency signal, which can be directly converted into a flow value for jujube cars. Using a quality jujube kernel flowmeter: Principle: Directly measure the mass flow rate of the fluid, unaffected by changes in fluid density. Types: including Coriolis mass flowmeter and thermal mass flowmeter. Output: Usually quality flow, which can be directly used or converted to other flow units. In practical applications, the choice of method depends on specific application scenarios and requirements, such as steam pressure and temperature fluctuations, flow rate variation range, cost, maintenance requirements, and measurement accuracy. At the same time, other factors such as impurities in the fluid, pipeline layout, and installation conditions also need to be considered. Therefore, in practical operation, it is recommended to refer to relevant engineering manuals, stan
2. Is the flow rate displayed on the steam flow meter t/h or m06/h
The flow rate displayed on the steam flow meter can be either t/h or m3/h. When measuring steam using a volumetric Kumashan flowmeter, the display unit of the steam flowmeter is cubic meters per hour. This flowmeter measures the volumetric flow rate of steam under certain conditions. When using a mass flow meter to measure steam: the display unit of the steam flow meter is tons per hour. This type of flow meter directly measures the mass of steam without the obstruction of flow material, which can more accurately reflect the actual energy of steam.
3. Which brand of steam flowmeter is reliable in quality?
Currently, reliable steam flowmeter brands are divided into imported and domestic brands. Imported brands perform well in extreme working conditions and high-precision trade settlement scenarios, while domestic brands have outstanding cost-effectiveness and can choose suitable products according to actual usage scenarios.
1. Imported brand 1 E+H: It has advantages in extreme working conditions and long-term stability, with complete explosion-proof qualifications, which can meet the high-precision and long-term stability requirements of trade settlement. 2. Emerson: Its Rosemount 8800 series is the worlds first multivariable vortex flowmeter. A single instrument can simultaneously measure vortex frequency, temperature, and pressure, directly output mass flow and heat, reduce process perforation and leakage points, and is suitable for superheated steam trade settlement. Explosion proof qualifications are also relatively complete. Yokogawa: Its dyfran series